Bi Quad Antenna

The point of this project is to design or improve the design of a Bi Quad Antenna for the 2.4 ghz band. In addition to that they are to be made cheap but effective and made of parts readily available in a hardware store. So far the total cost of this project is about $1.50 for the BNC connector. I will list all parts required to make this antenna below.

I will post the dimenshons of the antenna here as soon as I get some picutres made to help illistrate them. Tell then look at these pictures. Note that in the 2nd picture the bottom one is biger than the top. The bottom one is the correct size.